Con rods
Porsche 911 2.0 / 2.2 litre steel "H" section connecting rods
These conrods are to suit the air cooled 911 based 2.0 litre and 2.2 litre engines. They are std dimensions to accept the std and after market forged pistons and factory big end bearings. Come with ARP 2000 bolts.
Dimensions
Centre to centre length 130.00mm
Big end i.d 61.00mm
Big end width 21.74mm
Pin diameter 22.00mm
small end width 25.4mm
Price £798.00 In stock
Any questions please Email me
Porsche 911 3.0 litre SC based steel "H" section connecting rods
These conrods are to suit the air cooled 911 3.0sc based engines. They are std dimensions to accept the std and after market forged pistons and factory big end bearing. Come with ARP 2000 bolts.
Dimensions
Centre to centre length 127.75mm
Big end i.d 56.00mm
Big end width 21.74mm
Pin diameter 22.00mm
small end width 25.4mm
Price £798.00 In stock
Any questions please Email me
Porsche 930/964 based steel "H" section connecting rods
These conrods are to suit the air cooled 930/964 3.2/3.6 litre based engines. They are std dimensions to accept the std and after market forged pistons and factory big end bearing. Come with ARP 2000 bolts.
Dimensions
Centre to centre length 127.00mm
Big end i.d 58.00mm
Big end width 21.85mm
Pin diameter 23.00mm
small end width 23.55mm
Price £798.00 In stock
Any questions please Email me
Toyota 1JZ GTE steel "H" section conrods
This is a new set of steel "H" section conrods to suit the Toyota 1JZ GTE, 1JZ and 1JZ GE engines fitted to the Toyota / Lexus Supra, Soarer, Cresta, Chaser and Crown models. These have std size big ends along with std small ends to accept the std crankshaft and all aftermarket forged pistons or std items. Rod caps are double through doweled and fitted with ARP 2000 bolts. Small ends use heavy duty silicon bronze bushes. These come in a balanced set of six and at 532g each compared with the std 723g offer a useful saving in reciprocating weight. Manufactured in USA.
100% Magnaflux tested
Centre to centre 125.25mm
Big end width 26.00mm
Small end width 26.00mm
Silicone bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 532g
In stock
Price: £745.00
Postage: £17.99
Any questions please Email me
COSWORTH RS500 PINTO 134.2mm steel "H" section con rods.
This is a new set of steel "H" section con rods. to suit the Ford Cosworth YBB, YBM, RS500 based engines. These will also fit Pinto based engines. They have std big end sizes but the small end is to suit the Holbay / Burton / Accralite 1316xc 9093-93 range of pistons that use .8125" X.Flow size pins. The length is 134.2mm / 5.283" from centre to centre and these suit the 77mm std crank or 80mm stroke cranks available. Balanced set of four. These are produced in USA.
Magnaflux tested
Centre to centre 5.205"
Big end width 1.020"
Small end width .930"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 595g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00Postage: £15.99
COSWORTH RS500 PINTO 132.2mm steel "H" section con rods.
This is a new set of steel "H" section con rods. to suit the Ford Cosworth YBB, YBM, RS500 based engines. These will also fit Pinto based engines. They have std big end sizes but the small end is to suit the Holbay / Burton / Accralite 1316xc 9093-93 range of pistons that use .8125" X.Flow size pins. The length is 132.2mm / 5.205" from centre to centre and these suit the 82mm or 84mm stroke cranks available. Balanced set of four. these are produced in USA.
Magnaflux tested
Centre to centre 5.205"
Big end width 1.020"
Small end width .930"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 585g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
COSWORTH RS500 PINTO 5.060" / 128.52mm steel "H" section con rods
This is a new set of steel "H" section con rods at the std length to suit the Ford Cosworth YBB, YBM, RS500 based engines. These will also fit Pinto based engines. They have std big end and small end sizes. The length is 128.52mm / 5.060"" from centre to centre and these suit the 76.95mm std crank or 80mm stroke cranks available. Balanced set of four. These are produced in USA.
Magnaflux tested
Centre to centre 5.060"
Big end width 1.020"
Small end width 1.020"
Small end dia. 24mm
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 575g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
Ford Cologne RS2600 2.8 2.9 V6 steel "H" section con rods
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
This is a new set of Ford based steel "H" section con rods to suit the Cologne V6 engine. These come with std size big ends to suit the 2.8 and 2.9 crankshafts along with the Cosworth Scorpio BOA and BOB version but with .8125" size bronze bushed small end to suit the Accralite / Holbay 93mm + 94mm forged pistons available. They are 135.71mm centre to centre rather than the std 130.62mm so will not accept the std Ford cast pistons. Weight is 515g. These can be used in turbo or N/A application. Come double through doweled along with ARP 2000 bolts.
Any questions please Email me
IN STOCK
Price: £725.00
Postage: £17.99
Ford X Flow Twincam pre x flow "H" section W/J 5.430" rods
This is a new set of Ford based steel "H" section con rods. They are wide journal to fit X.Flow, pre x.flow, Twincam, BDA, based engines. Ideal for 1300cc capacity based engines built into 1600cc tall blocks. Balanced set of four.
Magnaflux tested
Centre to centre 5.430"
Big end width 1.059"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weigh 575g
Tested to 10000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
Ford X Flow Lotus Twincam BDA "H" section N/J+W/J 5.230" rods
This is a new set of Ford based steel "H" section con rods. They are available in both narrow and wide journal to fit X.Flow, pre x.flow, Twincam, BDA, BDG based engines. Balanced set of four. These are produced in USA.
Magnaflux tested
Centre to centre 5.230"
Big end width .931"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 580g
Tested to 9000+rpm!
Available singularly
Price: £525.00
Postage: £15.99
Ford X Flow Lotus N/J+W/J "H" section 5.100"rods
This is a new set of Ford based steel "H" section con rods. They are available in both narrow and wide journal to fit X.Flow, pre x.flow, Lotus Twincam, BDA, BDH, BDG based engines. These fit the narrow journal race crankshafts Balanced set of four.
Magnaflux tested
Centre to centre 5.100"
Big end width .930"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 610g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00Postage: £15.99
Ford X Flow Lotus Twincam BDA N/J+W/J "H" section 4.926"rods
This is a new set of Ford based steel "H" section con rods. They are available in both narrow and wide journal to fit X.Flow, pre x.flow, Twincam, BDA, BDG based engines with std. width big end journals. Balanced set of four. These are produced in USA. These are supplied to and used by many of the top engine builders in the UK, Europe and supplied to Retro Ford Magazines project engines.
For more info on stocked lengths available call on 07711 051 or ike@ikengineering.co.uk
Shot peened
Magnaflux tested
Centre to centre 4.926"
Big end width 1.059"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 530g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
Ford X Flow Lotus Twincam W/J "H" section 4.826"rods
This is a new set of Ford based steel "H" section con rods. They are wide journal to fit X.Flow, pre x.flow, Twincam, BDA, based engines. Balanced set of four.
Magnaflux tested
Centre to centre 4.826"
Big end width 1.059"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 560g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00Postage: £15.99
Ford X Flow pre x flow Twincam N/J "H" section 4.626"rods
This is a new set of Ford based steel "H" section con rods. They are narrow journal to fit X.Flow, pre x.flow, Twincam, BDA, BDH, based engines. These are suited to short stroke 1300 or 1500cc block based engines. Balanced set of four.
EN24 heat treated
Shot peened
Magnaflux tested
Centre to centre 4.626"
Big end width .928"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weigh 520g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £16.99 Parcel force 48
Ford X Flow pre x flow N/J "H" section 4.526"rods
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
This is a new set of Ford based steel "H" section con rods. They are narrow journal to fit X.Flow, pre x.flow, Twincam, BDA, based engines. These are suited to short stroke 1300 block based engines. Balanced set of four.
EN24 heat treated
Shot peened
Magnaflux tested
Centre to centre 4.526"
Big end width .928"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weigh 510g
Tested to 9000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £16.99 Parcel force 48
Ford X Flow Twincam pre x flow W/J+N/J "H" section 4.426" rods
This is a new set of Ford based steel "H" section con rods. They are wide journal to fit X.Flow, pre x.flow, Twincam, BDA, based engines. Ideal for 1300cc based engines. Balanced set of four.
Magnaflux tested
Centre to centre 4.426"
Big end width 1.059"
Small end width .928"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weigh 535g
Tested to 10000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
Ford RS2000 MK6 "H" section steel 5.88" con rods.
This is a new set of steel "H" section con rods. designed to fit in the 2.3L Galaxy engine which can be retro fitted to the RS2000 MK6 Escort. They accept the standard Ford big end bearings and have bronze small end bushes fitted to allow for cir clip pistons rather than the std. interference fit Ford items. APR 2000 3/8"unf big end bolts are used rather than the Ford 8mm stretch item These come with 5.88" center to center length as per std. to allow fitment of pistons available from Cosworth etc. Forged 12.0:1cr 90mm pistons are available email me for details. Come in balanced set of four. these are produced in USA in 4340 steel.
Shot peened
Magnaflux tested
Centre to centre 5.88"
Big end width 1.012"
Small end width .826"
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 570g
Tested to 9000+rpm!
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
Vauxhall C20XE SBD Omega Hotrod long steel "H" con rods.
This is a new set of steel "H" section con rods. to suit the Vauxhall C20XE 2.0 litre 16v engine. They will only fit with the Omega / Ross / Arias or similar 2 ring race pistons. The rod is non standard length at 148mm as per the SBD supplied rods with small 20mm pin. These are used in race or Hotrod engines. Balanced set of four.
THESE WILL NOT FIT WITH STD PISTONS!
Magnaflux tested
Centre to centre 148mm
Big end width 26.36mm
pin diameter 20mm
Small end width 19.00mm
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 520g
Tested to 10000+rpm!
Available singularly
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99
Vauxhall C20XE forged pistons and steel "H" con rods.
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
This is a new set of steel "H" section con rods. and forged pistons to suit the Vauxhall C20XE 2.0 litre 16v engine. This is probably at present the ultimate set up for real torque and HP. The rod is non standard length at 148mm with 20mm pin. It come with ARP 2000 bolts and are produced in USA. The 87mm piston is ultra short comp height 2 ring design to suit. The intruder crown will need machining to correctly set your compression ratio required. Valve pockets are sized to accept all oversize valves available at present. They come with rings pins and clips. All major dimensions are shown. This package fits in the std. height block. These are produced in USA.
Any questions please Email me
IN STOCK
Price: £875.00
Postage: £23.30
Lexus Toyota IS200 1GFE piston and "H" section rod kit
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
This is a new set of steel "H" section con rods. with forged pistons to suit the Toyota Lexus 1GFE IS200 engines. The rods come with bronze bushed small ends with 18mm pin size and are longer than std to enhance rod angle and torque output. Oil holes for piston cooling are incorporated as per std. ARP 2000 bolts are included as std. Pistons are forged aluminum with revised ring pack, piston pin offset and compression height to reduce piston noise and increase power from std factory design. Compression ratio is as per std. Pins are floating with wire clips rather than the std interference factory fit. Crown design differs from std to increase swirl for increased combustion efficiency and are suitably thick for turbo or supercharged applications. Bore size is 76mm (75mm std) so your block will need boring to suit. All rings pins and clips are supplied
Any questions please Email me
IN STOCK
Price: £1,560.00
Postage: £23.90
Subaru STi 22B WRX "H" section con rods. with ARP bolts
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
.jpg "CLICK IMAGE TO ENLARGE AND CLICK AGAIN TO RETURN")
This is a new set of Subaru based steel "H" section con rods. They are to fit the EJ20 / 22 / 25 STi / WRX / 22B engines. Small ends are of the wasted design to reduce weight Balanced set of four. these come with ARP 2000 spec bolts as std. These are produced in the USA.
Magnaflux tested
Bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Any questions please Email me
IN STOCK
Price: £525.00
Postage: £15.99Other Courier
Nissan RB25DET / 26DETT steel "H" section conrods
This is a new of steel "H" section conrods to suit the Nissan RB25DET and RB26DETT engine models. These also will fit the RB25DE engines and Neo34 engine. These have std size big ends along with std small ends to accept the std crankshaft and all aftermarket forged pistons or std items. Rod caps are double through doweled and fitted with ARP 2000 bolts. Small ends use heavy duty silicon bronze bushes. These will easily handle 1000hp and 10,000rpm in these engines These come in a balanced set of six.
Manufactured in USA.
100% Magnaflux tested
Centre to centre 121.50mm
Small end dia. 21.00mm
Silicone bronze bushed small end
ARP 2000 3/8" UNF bolts fitted
Weight 525g
IN STOCK
Price: £725.00
Postage: £17.99
Any questions please Email me